There are a number of benefits when you are using Apex universal remote. This is a type of universal remote when programmed with the right code can work with any device apart from Apex tv. The Apex tv remote is one of the easiest device to program. With the help of the correct Apex universal remote codes, this can control a number of components with ease and comfort.
- 1 Apex Universal Remote Codes List
- 2 How to Program Apex Universal Remote
Apex Universal Remote Codes List
As mentioned earlier, the universal emote for Apex tv can take control over a number of devices. We are providing the full list of Apex tv remote codes as reference when you wish to program it with the preferred device. Also listed in our Apex universal remote codes list is the corresponding model and brand of device. Both the codes and the device should match with each other for successful pairing.
Apex Universal Remote 4 Digit Codes
1434, 1400, 2521, 1085, 1111, 0214, 0216, 0215, 1236, 1241, 1287, 1376, 0401, 1119, 1163, 1256, 1088
Apex Universal Remote 5 Digit Codes
11531, 10879, 10748, 10767, 11991, 10890, 10889, 10156, 10765
Apex Universal Remote 3 Digit Codes
595, 744, 618, 005, 006, 743, 757, 552, 594, 815, 759, 745, 548, 312, 222, 542, 574, 771, 019, 214, 215, 216, 401, 236, 240, 241, 023, 032
APEX DVD Player Universal Remote 4 Digit Codes
2001, 2056, 2057, 2061, 2095, 2098, 2229, 2250, 2262, 2316, 2322
APEX Audio Component Universal Remote Codes
APEX VCR Universal Remote Codes
How to Program Apex Universal Remote
The only way to make an Apex universal remote work with other device is to program it using the correct Apex tv codes. The steps on how to program Apex universal remote is very simple and it could considered a DIY project without seeking for the assistance of an expert technician. When programming, make sure that your universal remote is fully charged with batteries and that the device should be powered on. Search for the right Apex universal remote code on the list and match it with the preferred device you want to program. These are the basic and important reminders during the procedure.
Check the below instructions and start programming the Apex universal remote:
Programming Apex Universal Remote With Direct Code Entry
In case, you are searching for the easy steps just to enter the code at your device then you landed at the best post because below, here you will get the steps that you need to follow for the direct code entry. So let’s have a look-
1). First of all “Find the code” from above list
2). After that, you need to “ON” the device according to the wish that you want to control.
3). Now you need to press and hold the button of the “SETUP” unless you will see the indicator of the light and then you have to release the button.
4). Press and Hold the button of the remote. You will see that the “Red Light” will blink and it remains on.
5). Please “Enter the Code” which you will get in the list of the code. By using the button of the remote, you have to enter the valid code.
6). Then press “Power” button. if your code is correct then your device will turn off, means you programmed your device successfully with remote.
Note: if you have entered the incorrect code then your device will not turn off it means your have try again with different code with same steps.
Make sure that if you will not press any button then after 10 seconds, the remote will exit all the setup. Again you have to start the process. In the last, you have to point the remote towards the device. You need to press the button of the POWER if your device turns off. In case, your device does not turn off then you have return towards step3 and enter the next code from the list.You have to do this process until you will find the code for your device.
Programming Apex Universal Remote With Auto Code Search
You have to read the below steps just to start the search of the auto code. As through the auto search, you can easily search the codes as all the codes are stored in the remote. So let us follow the below steps-
1). You have to Turn on your device that you want to control.
2). Now press button of the “Setup” for the 4 seconds. then press the corresponding device button.
3). Now Press the “POWER” button then wait for the device to turn off.
4). After that press and release the button of the POWER just to start the search. You will see that the red indicator will flashes just for the 2 seconds when you search the code.
5). Make sure that your finger should be on the #1 button just to prepared to lock-in the code.
6). When you see that the device is shut off or start begins playing, then you need to press the #1 button. The indicator of the red light will turn off. its means you device successfully paired with remote.
Now you have to point the remote at your device. You need to examine that the device operates as per your desire. In case, it does, then there is no programming required. If you see the error then you have to go to the step2 again and start the auto search again. For every device (TV, DVD, SAT, AUX), you have a repeat this process in the system of your entertainment. At one time you can program the eight devices.
We hope that this article has helped you to successfully program the Apex universal remote using our given codes and instructions. If you have additional questions, feel free to leave a comment below. We wanted to hear your experience using the above article as reference to guide other readers as well.