If you are looking for the Chunghop Universal Remote Codes then here you can get so many chunghop universal remote codes. Because below in this post we will share the complete list of chunghop universal tv remote codes by which you can easily program your own chunghop universal remote.
Chunghop Universal Remote Codes list
Because without having the working universal remotes codes it is not possible to program your own universal remote. And, if you are not able to do it, then you need to use different remotes every time for each device. That is the reason why everyone finding chunghop remote codes.
Aiwa : 009, 057, 058
Hisense : 676, 677, 707, 898
JVC : 089, 161, 909
LG : 024, 040, 098
Philips : 013, 023, 024
Panasonic : 020, 001, 002
Samsung : 618, 619, 620, 621
Sharp : 003, 018, 016
Sanyo : 063, 064, 065, 066
Sony : 041, 049, 005
TCL : 051, 053, 068
All Other Brands : 036, 044, 057, 073
Three digit codes for Chunghop universal remote with models: 308A, M1E, Q-33E/SP, Q-X33E, RM-109E, RM-133E, RM-138E, RM-139E/EX/H/L/B/C, RM-161SP, RM-168E, RM-398E, RM-88E/C, RM-A100, RM-A1E, RM-M800, RM-X139, TR007, UR-113, UR-188, UR-306, UR-318, UR-320, UR-328 and many others.
How To Program Chunghop Universal Remote
To program the chunghop universal remote, you need to follow a few steps with your remote and the device for which you want to program a universal remote. Because it is the only way to use the given codes. If you do not follow these steps, then it doesn’t matter either you have chunghop universal remote code or not. It’s just like the preparation that you have to do before programming your own universal remote. Well, let’s get ready to check out the complete method by which I will tell you, what exactly you need to do.
Programming Chunghop Universal Remote With Direct Code Entry
In case, you are searching for the easy steps just to enter the code at your device then you landed at the best post because below, here you will get the steps that you need to follow for the direct code entry. So let’s have a look-
1). First of all “Find the code” from above list
2). After that, you need to “ON” the device according to the wish that you want to control.
3). Now you need to press and hold the button of the “SETUP” unless you will see the indicator of the light and then you have to release the button.
4). Press and Hold the button of the remote. You will see that the “Red Light” will blink and it remains on.
5). Please “Enter the Code” which you will get in the list of the code. By using the button of the remote, you have to enter the valid code.
6). Then press “Power” button. if your code is correct then your device will turn off, means you programmed your device successfully with remote.
Note: if you have entered the incorrect code then your device will not turn off it means your have try again with different code with same steps.
Make sure that if you will not press any button then after 10 seconds, the remote will exit all the setup. Again you have to start the process. In the last, you have to point the remote towards the device. You need to press the button of the POWER if your device turns off. In case, your device does not turn off then you have return towards step3 and enter the next code from the list.You have to do this process until you will find the code for your device.
Programming Chunghop Universal Remote With Auto Code Search
You have to read the below steps just to start the search of the auto code. As through the auto search, you can easily search the codes as all the codes are stored in the remote. So let us follow the below steps-
1). You have to Turn on your device that you want to control.
2). Now press button of the “Setup” for the 4 seconds. then press the corresponding device button.
3). Now Press the “POWER” button then wait for the device to turn off.
4). After that press and release the button of the POWER just to start the search. You will see that the red indicator will flashes just for the 2 seconds when you search the code.
5). Make sure that your finger should be on the #1 button just to prepared to lock-in the code.
6). When you see that the device is shut off or start begins playing, then you need to press the #1 button. The indicator of the red light will turn off. its means you device successfully paired with remote.
Now you have to point the remote at your device. You need to examine that the device operates as per your desire. In case, it does, then there is no programming required. If you see the error then you have to go to the step2 again and start the auto search again. For every device (TV, DVD, SAT, AUX), you have a repeat this process in the system of your entertainment. At one time you can program the eight devices.
Comment Doubts About Chunghop Universal Remote
I hope now you have enough information and you can easily program your own chunghop universal remote. You don’t need to search about it anymore, because this post contain everything that you may need to program a chunghop universal remote. We have shared a complete list of chunghop universal tv remote codes that you can copy from here.
Once you are done with the complete process, then you will be able to manage your TV, DVD or CD player with the on a universal remote. It makes your work easier in a proper way.