Craig DVD Player Universal Remote Codes & Instructions

If you have a craig dvd player and you want to program a universal remote for it then this guide will prove very helpful for you. Here we have posted all working craig dvd player remote codes list that you can use to program your remote control. To program your remote to use with crage dvd player you must need correct craig dvd player setup codes that are essential part of programming steps.  Basically, Craig dvd player can be operated with any kind of universal remote control but you should need to follow the correct programming instructions.

Craig DVD Universal Remote Codes List

Craig dvd player universal remote codes are of mainly 3 figure, 4 figure, and 5 figure universal codes that is used for programming the remote control.  You can choose any craig dvd remote code from here available list and if the code doesn’t program your remote then try using alternative remote code.

• 1484
• 1036

How To Program Craig DVD Player Universal Remote?

If you have craig dvd player remote code then you can choose any of the available remote programming methods like code search, manual setup, and keycode to program your universal remote. Just follow the instructions properly and use working remote code and you are all done to access your dvd player with universal remote control.

Programming Craig DVD Player Universal Remote With Keycode Method

Through the keycode method you can easily program Craig DVD Player universal remote and also it find outs the component model you are using.

1. “Turn on” the Device
2. Tap the “TV” on “Craig DVD Player Universal remote”.
3. Now Click & hold on “Setup Button” of the universal remote till the “Light flash”(It shows the learning mode).
4. Now enter the “Keycode” which you find from above mentioned list.
5. Once the process completed, “Point your remote at TV” then “Press & Hold the Power” button.
6. Release the “Power Button” when the screen turns off.

Programming Craig DVD Player Universal Remote With Code Search Method

1. “Turn on” your Device.
2. Then Click & hold the “Setup” button
3. Now enter “9-9-1”(3-digit code)
4. Hold down the “Power Key” on remote and then click the channel up until the device “turns off”.

Programming Craig DVD Player Universal Remote With Manual Setup

1. Place the device “Remote control facing Universal remote control you are willing to replace”.
2. Click the “Setup key” or “Magic”.
3. Enter “Code” from above provided list
4. Tap any key of functions which you like to “Program”. Example- TV volume up.
5. Now tap & hold the corresponding button on “Original Remote Controller”.
6. Lastly, A light will “Blink” which means the program saved successfully.
7. Now the “TV Volume Up” button saved to your Universal remote & you can use volume button.

Conclusion:

Please share your experience with this article and let us know if you have any query and suggestions for us to improve your user-experience. Also, write us via comments if you are missing any remote code or found any new universal remote codes from other sources.