Do you find using different remote controls annoying? If you wanted to organize a number of devices to operate with only one remote control, then the Grundig universal remote is what you need. This type of remote will not only work with Grundig tv but can operate a number of devices when programmed using unique codes.
- 1 Grundig Universal Remote Codes List
- 2 How to Program Grundig Universal Remote
Grundig Universal Remote Codes List
There are a lot of benefits when a number of devices are controlled by a single remote. The Grundig remote control codes provided in our list will be the key to match the compatibility with the preferred device. It requires one specific Grundig tv code as well as with other devices. We will also be providing the programming procedure where you can input the right code need to control the device.
Grundig Universal Remote 4 Digit Codes
1351, 1308, 1037, 2719, 2059, 2200, 0331, 0171, 1301, 1221, 0037, 3433, 1341, 2781, 1248, 0535, 1056, 5072, 1687, 2127, 1364, 1645, 2007, 1144, 0191, 1376, 2551, 1259, 1321, 1271, 1241, 0310, 3262, 2751, 0009, 1124, 1916, 1324, 2663, 1131,0029, 0554, 1281, 2676, 1251, 0487, 0556, 1667, 0022, 2625, 0160, 0443, 1211, 1223, 0036, 0508, 5067, 5064, 1908, 0370, 0343, 2125, 2890, 0178, 2541, 0020, 0161, 1523, 0706, 0026, 2239, 2561, 2053, 1582, 3067, 1372, 0195, 0587, 1261, 0320, 1935, 1331, 1231, 3296, 2791, 1311
Grundig Universal Remote 3 Digit Codes
113, 128, 110, 547, 670, 673, 603, 070, 071, 195, 063, 191, 205, 237, 076, 313, 417, 422, 034, 163
Grundig Universal Remote 5 Digit Codes
The Grundig tv remote is designed with advanced features where you can easily input the code and make the programming successfully work. You will find that Grundig remote control codes are highly important to control a number of devices.
How to Program Grundig Universal Remote
There are only a few and easy ways to program Grundig Universal Remote. If you think it involves complicated process, don’t worry because this procedure can be done without help from an expert. We will be providing the step by step procedure from which you need to enter the prescribe code. Take note that every step is important to successfully setup and program the Grundig universal remote to work with your device. You will be guided with the given instructions, so do not skip anything while doing the procedure.
Here are the instructions on how to program Grundig universal remote:
Programming Grundig Universal Remote With Direct Code Entry
In case, you are searching for the easy steps just to enter the code at your device then you landed at the best post because below, here you will get the steps that you need to follow for the direct code entry. So let’s have a look-
1). First of all “Find the code” from above list
2). After that, you need to “ON” the device according to the wish that you want to control.
3). Now you need to press and hold the button of the “SETUP” unless you will see the indicator of the light and then you have to release the button.
4). Press and Hold the button of the remote. You will see that the “Red Light” will blink and it remains on.
5). Please “Enter the Code” which you will get in the list of the code. By using the button of the remote, you have to enter the valid code.
6). Then press “Power” button. if your code is correct then your device will turn off, means you programmed your device successfully with remote.
Note: if you have entered the incorrect code then your device will not turn off it means your have try again with different code with same steps.
Make sure that if you will not press any button then after 10 seconds, the remote will exit all the setup. Again you have to start the process. In the last, you have to point the remote towards the device. You need to press the button of the POWER if your device turns off. In case, your device does not turn off then you have return towards step3 and enter the next code from the list.You have to do this process until you will find the code for your device.
Programming Grundig Universal Remote With Auto Code Search
You have to read the below steps just to start the search of the auto code. As through the auto search, you can easily search the codes as all the codes are stored in the remote. So let us follow the below steps-
1). You have to Turn on your device that you want to control.
2). Now press button of the “Setup” for the 4 seconds. then press the corresponding device button.
3). Now Press the “POWER” button then wait for the device to turn off.
4). After that press and release the button of the POWER just to start the search. You will see that the red indicator will flashes just for the 2 seconds when you search the code.
5). Make sure that your finger should be on the #1 button just to prepared to lock-in the code.
6). When you see that the device is shut off or start begins playing, then you need to press the #1 button. The indicator of the red light will turn off. its means you device successfully paired with remote.
Now you have to point the remote at your device. You need to examine that the device operates as per your desire. In case, it does, then there is no programming required. If you see the error then you have to go to the step2 again and start the auto search again. For every device (TV, DVD, SAT, AUX), you have a repeat this process in the system of your entertainment. At one time you can program the eight devices.
Have you found the right code that works with your device when saved in Grundig universal remote? If you are done with the programming using the codes and instructions we provided, please share with us. Your experience will guide others who are having the same situation as yours. Leave us a message on the comment box below.