The JVC universal remote is designed with exceptional features to easily manuever and take control of the JVC tv. But don’t get upset when the JVC remote starts to malfunction and could no longer work with your JVC tv. These days, all it needs is the JVC universal remote codes and everything will work perfectly.
- 1 JVC Universal Remote Codes List
- 1.1 JVC HDTV Universal Remote 3 Digit Codes
- 1.2 JVC HDTV Universal Remote 4 Digit Codes
- 1.3 JVC TV Universal Remote 4 Digit Codes
- 1.4 JVC DVD Universal Remote 4 Digit Codes
- 1.5 JVC VCR Universal Remote 4 Digit Codes
- 1.6 How to Program JVC Universal Remote
- 1.7 Programming JVC Universal Remote With Direct Code Entry
- 1.8 Programming JVC Universal Remote With Auto Code Search
JVC Universal Remote Codes List
There are different sets of JVC remote codes to choose from in order to operate your JVC tv. From the wide range of JVC universal remote codes list, you will search one which works for your JVC tv model. Basically among these options come the JVC tv remote codes 3,4, and 5 digits.
These 4 codes worked for many people so first try these then try below codes
JVC HDTV Universal Remote 3 Digit Codes
JVC HDTV Universal Remote 4 Digit Codes
JVC TV Universal Remote 4 Digit Codes
JVC DVD Universal Remote 4 Digit Codes
JVC VCR Universal Remote 4 Digit Codes
Only a single JVC remote code is required from among the many options in order to make the universal remote works with your JVC tv. There might be instances where he first entry will not work but keep trying until you got the right code and save it to your universal remote.
How to Program JVC Universal Remote
The JVC tv will work with any universal remote as long as it is programmed with the right JVC tv code. We have made the programming very lightweight and easy for you with our quick instructions. Regardless of the JVC tv model, we have compiled a complete selection of JVC remote codes to choose from. Our step by step instructions will be hour ultimate guide in setting up your JVC universal remote using the given codes. If one code or procedure will not work at your convenience, take another option until you will eventually reap positive results.
Here are the different ways on how to program the JVC universal remote:
Programming JVC Universal Remote With Direct Code Entry
In case, you are searching for the easy steps just to enter the code at your device then you landed at the best post because below, here you will get the steps that you need to follow for the direct code entry. So let’s have a look-
1). First of all “Find the code” from above list
2). After that, you need to “ON” the device according to the wish that you want to control.
3). Now you need to press and hold the button of the “SETUP” unless you will see the indicator of the light and then you have to release the button.
4). Press and Hold the button of the remote. You will see that the “Red Light” will blink and it remains on.
5). Please “Enter the Code” which you will get in the list of the code. By using the button of the remote, you have to enter the valid code.
6). Then press “Power” button. if your code is correct then your device will turn off, means you programmed your device successfully with remote.
Note: if you have entered the incorrect code then your device will not turn off it means your have try again with different code with same steps.
Make sure that if you will not press any button then after 10 seconds, the remote will exit all the setup. Again you have to start the process. In the last, you have to point the remote towards the device. You need to press the button of the POWER if your device turns off. In case, your device does not turn off then you have return towards step3 and enter the next code from the list.You have to do this process until you will find the code for your device.
Programming JVC Universal Remote With Auto Code Search
You have to read the below steps just to start the search of the auto code. As through the auto search, you can easily search the codes as all the codes are stored in the remote. So let us follow the below steps-
1). You have to Turn on your device that you want to control.
2). Now press button of the “Setup” for the 4 seconds. then press the corresponding device button.
3). Now Press the “POWER” button then wait for the device to turn off.
4). After that press and release the button of the POWER just to start the search. You will see that the red indicator will flashes just for the 2 seconds when you search the code.
5). Make sure that your finger should be on the #1 button just to prepared to lock-in the code.
6). When you see that the device is shut off or start begins playing, then you need to press the #1 button. The indicator of the red light will turn off. its means you device successfully paired with remote.
Now you have to point the remote at your device. You need to examine that the device operates as per your desire. In case, it does, then there is no programming required. If you see the error then you have to go to the step2 again and start the auto search again. For every device (TV, DVD, SAT, AUX), you have a repeat this process in the system of your entertainment. At one time you can program the eight devices.
Choosing JVC universal remote is considered a great option to operate your JVC tv. Just make sure that you have followed our step by step guide to make the programming very easy. For questions or suggestions about JVC universal remote codes, please leave a comment below. We hope that we have helped you with the setting up process!.