The Konka tv remote is amongst the list having advanced features which when programmed with the perfect code can work with different devices. If you wish to eliminate the clutter in your living room, the Konka remote can offer the best solution. This will able to operate a number of devices while keeping the room organized from clutter.
- 1 Konka Universal Remote Codes List
- 2 How to Program Konka Universal Remote
Konka Universal Remote Codes List
There are great benefits when you program the Konka remote using our given codes list. A unique Konka remote code is required for each device depending on model and brand. This simply means that each device will require a different Konka universal remote code. Normally, the codes list could be found along with the Konka tv manual during your purchase.
Konka TV Universal Remote 3 Digit Codes
753, 011, 053, 413, 744, 047, 176, 671, 515, 412, 013, 157, 012, 066, 526, 158, 016, 510, 516
Konka TV Universal Remote 4 Digit Codes
0306, 1241, 0714, 4901, 0703, 0628, 5322 5441, 5228, 0037, 5189, 5161, 0842, 5062, 0587, 2241, 5041, 0203, 5045, 0906, 0029, 0047, 5073, 2121, 4971, 5173, 0754, 6181, 0556, 2191, 1385, 2371, 0751, 0942, 0521, 0412, 0632, 0218, 0103, 5891, 4621, 5157, 0011, 0418, 0016, 0911, 0707, 1341, 0702, 0638, 0208, 0413, 0606, 0504, 0471, 0053, 1671, 0066, 0371
Konka TV Universal Remote 5 Digit Codes
11831, 14700, 19041, 11223, 11940, 11922, 14450, 12419, 16719, 15162, 11385, 16244, 10467, 10632, 12422, 11939, 13729, 19740, 10638, 17500, 10707, 10628, 15203
You only have to match the code corresponding to the model and brand of device. You will be required to enter the right code during the programming process. Make sure to double check the right code to avoid waste of time in repeating the process.
How to Program Konka Universal Remote
If you have the codes list and wanted to use Konka remote to work with your other devices, follow our given instructions. We will guide you to program the Konka universal remote and you only have to follow the instructions given without skipping any step. As long as you have the right code and you carefully follow the step by step procedure, you are sure to successfully operate a number of devices with Konka tv remote. There are times that the Konka remote code might seem confusing but you need to secure the right one compatible with the preferred device.
Below are the instructions on how to program Konka universal remote:
Programming Konka Universal Remote With Direct Code Entry
In case, you are searching for the easy steps just to enter the code at your device then you landed at the best post because below, here you will get the steps that you need to follow for the direct code entry. So let’s have a look-
1). First of all “Find the code” from above list
2). After that, you need to “ON” the device according to the wish that you want to control.
3). Now you need to press and hold the button of the “SETUP” unless you will see the indicator of the light and then you have to release the button.
4). Press and Hold the button of the remote. You will see that the “Red Light” will blink and it remains on.
5). Please “Enter the Code” which you will get in the list of the code. By using the button of the remote, you have to enter the valid code.
6). Then press “Power” button. if your code is correct then your device will turn off, means you programmed your device successfully with remote.
Note: if you have entered the incorrect code then your device will not turn off it means your have try again with different code with same steps.
Make sure that if you will not press any button then after 10 seconds, the remote will exit all the setup. Again you have to start the process. In the last, you have to point the remote towards the device. You need to press the button of the POWER if your device turns off. In case, your device does not turn off then you have return towards step3 and enter the next code from the list.You have to do this process until you will find the code for your device.
Programming Konka Universal Remote With Auto Code Search
You have to read the below steps just to start the search of the auto code. As through the auto search, you can easily search the codes as all the codes are stored in the remote. So let us follow the below steps-
1). You have to Turn on your device that you want to control.
2). Now press button of the “Setup” for the 4 seconds. then press the corresponding device button.
3). Now Press the “POWER” button then wait for the device to turn off.
4). After that press and release the button of the POWER just to start the search. You will see that the red indicator will flashes just for the 2 seconds when you search the code.
5). Make sure that your finger should be on the #1 button just to prepared to lock-in the code.
6). When you see that the device is shut off or start begins playing, then you need to press the #1 button. The indicator of the red light will turn off. its means you device successfully paired with remote.
Now you have to point the remote at your device. You need to examine that the device operates as per your desire. In case, it does, then there is no programming required. If you see the error then you have to go to the step2 again and start the auto search again. For every device (TV, DVD, SAT, AUX), you have a repeat this process in the system of your entertainment. At one time you can program the eight devices.
Have you successfully programmed your Konka tv remote? What code have you used to operate with which device? We hope that this article has guided you to successfully setup everything you need to operate your devices with Konka universal remote. We appreciate your comment by leaving us a message below.