With Universal remote you can operate any of your smart devices that you have paired. But to setup remote control, firstly you need to program your remote using correct universal remote codes and programming instructions. If you have a Memorex dvd player that you want to access using your universal remote then you are now landed over the right page. Here we have posted Memorex dvd player remote codes that you can use to program your remote. Without having Memorex dvd remote control codes you can’t perform the programming instructions. These Memorex dvd player codes are usually of 4-digit & 5 digit remote control codes.
- 1 Memorex DVD Universal Remote Codes
- 2 How to Program Memorex DVD Universal Remote?
Memorex DVD Universal Remote Codes
You can find working Memorex dvd remote universal code from the available list below. Choose a remote code compatible for your remote brand & version and perform the programming instructions. If the remote doesn’t program using a code then try alternative codes available here.
4 Digit Memorex DVD Universal Remote Codes
5 Digit Memorex DVD Universal Remote Codes
RCA Universal Remote Codes For Memorex DVD
GE Universal Remote Codes For Memorex DVD
Philips Universal Remote Codes For Memorex DVD
One-For-All Universal Remote Codes For Memorex DVD
How to Program Memorex DVD Universal Remote?
Programming a universal remote is quite easy tasks if you have correct remote codes and you follow the programming guide correctly. Regular universal remote programming methods like code search, keycode, and manual setup works properly with Memorex dvd player to program the remote control.
Programming Memorex DVD Player Universal Remote With Keycode Method
Through the keycode method you can easily program Memorex DVD Player universal remote and also it find outs the component model you are using.
- “Turn on” the Device
- Tap the “TV” on “Memorex DVD Player Universal remote”.
- Now Click & hold on “Setup Button” of the universal remote till the “Light flash”(It shows the learning mode).
- Now enter the “Keycode” which you find from above mentioned list.
- Once the process completed, “Point your remote at TV” then “Press & Hold the Power” button.
- Release the “Power Button” when the screen turns off.
Programming Memorex DVD Player Universal Remote With Code Search Method
- “Turn on” your Device.
- Then Click & hold the “Setup” button
- Now enter “9-9-1”(3-digit code)
- Hold down the “Power Key” on remote and then click the channel up until the device “turns off”.
Programming Memorex DVD Player Universal Remote With Manual Setup
- Place the device “Remote control facing Universal remote control you are willing to replace”.
- Click the “Setup key” or “Magic”.
- Enter “Code” from above provided list
- Tap any key of functions which you like to “Program”. Example- TV volume up.
- Now tap & hold the corresponding button on “Original Remote Controller”.
- Lastly, A light will “Blink” which means the program saved successfully.
- Now the “TV Volume Up” button saved to your Universal remote & you can use volume button.
We hope this guide will help you a lot to program your Memorex dvd player remote. Please share your feedback and experience with our website so we make improvements and serve you better.