If you are struggling in using several remote controls for every device in your living room, solve the issue by programming your Orion tv remote. It has unique features where and designed with easy to use keys where controlling a number of devices can be made possible. With the correct code, the Orion universal remote can work with other devices.
- 1 Orion Universal Remote Codes List
- 2 How to Program Orion Universal Remote
Orion Universal Remote Codes List
The Orion universal remote codes list is provided below to guide our readers in programming the Orion tv remote. We list down all the codes for Orion tv remote so that you cans elect the one which is compatible to your type of device. The list of all the codes will serve as easy reference when searching for the right code.
Orion Universal Remote 3 digit Codes For (v.1, v.2, v.3, v4)
081, 136, 030, 035, 191, 208, 017, 029, 056, 069
Orion Universal Remote 4 digit Codes For (v.1, v.2, v.3, v4)
1020, 1030, 1054, 1056, 1133, 1167, 1230, 2000, 2005, 2007, 2028, 2033, 2035, 2108, 2136, 2218
Orion Universal Remote 5 digit Codes For (v.1, v.2, v.3, v4)
10463, 11892, 13540, 13650
The codes are important when you need to program the Orion remote to work with your device. All the codes from our list have corresponding device bearing their respective model number and brand. Choose the code that is compatible to your device as a requirement during programming.
How to Program Orion Universal Remote
If you aim to program Orion universal remote to work with your other devices, we will be providing you with the detailed instructions. There are different ways on how to do the programming, we will discuss them one by one. As one of the main requirements, secure the right Orion tv remote code before you start the process. All the details of the programming method with complete details will be provided. For easy setup, the instructions are easy to understand. Just follow the step by step procedure without skipping anything on the given instructions.
Here are the ways on how to program Orion universal remote:
Programming Orion Universal Remote With Direct Code Entry
In case, you are searching for the easy steps just to enter the code at your device then you landed at the best post because below, here you will get the steps that you need to follow for the direct code entry. So let’s have a look-
1). First of all “Find the code” from above list
2). After that, you need to “ON” the device according to the wish that you want to control.
3). Now you need to press and hold the button of the “SETUP” unless you will see the indicator of the light and then you have to release the button.
4). Press and Hold the button of the remote. You will see that the “Red Light” will blink and it remains on.
5). Please “Enter the Code” which you will get in the list of the code. By using the button of the remote, you have to enter the valid code.
6). Then press “Power” button. if your code is correct then your device will turn off, means you programmed your device successfully with remote.
Note: if you have entered the incorrect code then your device will not turn off it means your have try again with different code with same steps.
Make sure that if you will not press any button then after 10 seconds, the remote will exit all the setup. Again you have to start the process. In the last, you have to point the remote towards the device. You need to press the button of the POWER if your device turns off. In case, your device does not turn off then you have return towards step3 and enter the next code from the list.You have to do this process until you will find the code for your device.
Programming Orion Universal Remote With Auto Code Search
You have to read the below steps just to start the search of the auto code. As through the auto search, you can easily search the codes as all the codes are stored in the remote. So let us follow the below steps-
1). You have to Turn on your device that you want to control.
2). Now press button of the “Setup” for the 4 seconds. then press the corresponding device button.
3). Now Press the “POWER” button then wait for the device to turn off.
4). After that press and release the button of the POWER just to start the search. You will see that the red indicator will flashes just for the 2 seconds when you search the code.
5). Make sure that your finger should be on the #1 button just to prepared to lock-in the code.
6). When you see that the device is shut off or start begins playing, then you need to press the #1 button. The indicator of the red light will turn off. its means you device successfully paired with remote.
Now you have to point the remote at your device. You need to examine that the device operates as per your desire. In case, it does, then there is no programming required. If you see the error then you have to go to the step2 again and start the auto search again. For every device (TV, DVD, SAT, AUX), you have a repeat this process in the system of your entertainment. At one time you can program the eight devices.
Are you interested to try programming your Orion tv remote with the given codes and instructions? If you found this article helpful share your experience with us. We can also assist other readers to successfully setup their remote to work with their device. Your testimony could be of help! Message us now!.