RCA SoundBar Universal Remote Codes & Instructions

Would you like to access your RCA soundbar device with favourite remote? Here we are to help you setup your remote control for your smart RCA sound bar. We have updated this page with all latest working rca sound bar codes as well as with correct remote programming guides. So you don’t need to worry and waste your time. Just start programming your universal remote/SAT/CABLE remote which you wanna use with your rca device with correct rca soundbar universal remote codes. You will find all remote brands universal remote code available here.

RCA SoundBar Universal Remote Codes List:-

RCA Sound bar remote codes are of 5 digit universal codes that you require while programming the remote control to operate your RCA device. So we have listed down all remote control codes of universal remote brands so you don’t face any difficulty in programming.

20060
30531
31254

• 20807
• 31023
• 33295
• 33091
• 20042
• 32426
• 21060
• 20035
• 20149
• 31459
• 31963
• 32041
• 30823
• 33297
• 21014
• 31609
• 33363
• 31511
• 31390
• 21035
• 30360
• 30531
• 31023
• 32655
• 33969

How to Program RCA Universal Remote to Soundbar?

You can program universal remote for soundbar using rca sound bar remote codes using any of the available programming methods. If a programming guide doesn’t help you to setup your remote control you can use any alternative remote program method and enter working universal sound bar code and you are all set.

Programming RCA SoundBar Universal Remote With Keycode Method

Through the keycode method you can easily program RCA SoundBar universal remote and also it find outs the component model you are using.

1. “Turn on” the Device
2. Tap the “TV” on “RCA SoundBar Universal remote”.
3. Now Click & hold on “Setup Button” of the universal remote till the “Light flash”(It shows the learning mode).
4. Now enter the “Keycode” which you find from above mentioned list.
5. Once the process completed, “Point your remote at TV” then “Press & Hold the Power” button.
6. Release the “Power Button” when the screen turns off.

Programming RCA SoundBar Universal Remote With Code Search Method

1. “Turn on” your Device.
2. Then Click & hold the “Setup” button
3. Now enter “9-9-1”(3-digit code)
4. Hold down the “Power Key” on remote and then click the channel up until the device “turns off”.

Programming RCA SoundBar Universal Remote With Manual Setup

1. Place the device “Remote control facing Universal remote control you are willing to replace”.
2. Click the “Setup key” or “Magic”.
3. Enter “Code” from above provided list
4. Tap any key of functions which you like to “Program”. Example- TV volume up.
5. Now tap & hold the corresponding button on “Original Remote Controller”.
6. Lastly, A light will “Blink” which means the program saved successfully.
7. Now the “TV Volume Up” button saved to your Universal remote & you can use volume button.

Conclusion:-

We hope our remote programming guide will definitely help you to program your remote control. Don’t forget to write us about your experience with this post so we make improvements.