Samsung Universal Remote Codes & Instructions

Samsung remote is the kind of universal remote that is mainly used to handle the TV and the various devices. Here below I am going to share the code list as well as the appropriate steps that you need to follow for the Samsung tv code. These codes are well updated and still you are facing any kind of problem then you need to take another code from the list. As it is the only way just to decrease the level of stress. We are living in a very busy life. So by applying the Samsung remote codes, you can make your work easier.

Samsung Universal Remote TV Codes

0226, 0156, 0644, 0370, 0072, 0178, 0009, 0618, 0208, 0556, 0329, 0519, 0060, 0030, 0056, 0702, 0812, 0150, 0482, 0264, 0747, 0216, 0625, 0448, 0093, 0163, 0090, 0179, 0821, 0774, 0037, 0019, 1060 0290, 0217, 0154, 0587, 0092, 0032, 0817

 Samsung TV Using Philips Remote Codes

0103, 0818, 0012, 0302, 0802, 0110, 0212, 0112, 0609, 0002, 0309, 0209, 0512, 0895, 0437, 0502, 0102

Samsung TV Using One-For-All Universal Remote Codes

0093, 0019, 0587, 0030, 0060, 0056, 0178,

Samsung TV Using  GE Universal Remote Codes

0007, 0004, 0080, 0012, 007,7 0085, 0105, 0076, 0104, 0172, 0015, 0358, 0009, 0106, 0109, 0942, 0005

Samsung TV Using  RCA Universal Remote 5 Digit Codes

10056, 10702, 10178, 10030, 10054, 10766, 10812, 11060, 10814, 10650, 10060

Samsung TV Using  RCA Universal Remote Codes

1205, 1025, 1207, 1123, 1103, 1194, 1102, 1046, 1124, 1004, 1009, 1015, 1056, 1083, 1069, 1078, 1065, 1104, 1013, 1014, 1012

Samsung TV Using  Samsung IR Codes

5201, 1661, 3911, 4121, 0301, 3811, 3861, 3751, 2141, 1181, 3881, 0161, 3781, 2391, 3211, 4841, 3761, 2401, 3771, 0261, 3791, 4101, 3741, 3831, 1561, 3721, 3601, 0181, 4831, 0051, 4111, 2551, 3661, 3711, 4091, 2791, 3821, 3921, 5191 (3211 work fine for Plasma and Led TV)

Samsung TV Using  Innovage Jumbo Remote Codes

105,106, 005, 104, 009, 172, 109, 015, 004

Samsung Universal Remote Instructions

• First of all, you have to “Turn off the TV” that you are programming for. Until the syncing process is complete, you just need to turn off.
• After that, you need to press the button of the remote. It basically tells the pairing with the TV just to get the proper signal
• Now you have to use either the paper clip or  toothpick just to press down the “Set” button which is given on the top of the remote
• You have to use the code of the 3 or 4 or 5 digit Samsung tv universal remote codes on the pad of the remote. you can get those codes from above list.
• In case if the code is showing the error then you have to choose another code from the list
• Just to check, you need to press the power button. If the Tv turn on then the code is working properly. In case it is showing an error then you have to repeat from the first step.

Programming Samsung Universal Remote With Direct Code Entry

In case, you are searching for the easy steps just to enter the code at your device then you landed at the best post because below, here you will get the steps that you need to follow for the direct code entry. So let’s have a look-

1). First of all “Find the code” from above list

2). After that, you need to “ON” the device according to the wish that you want to control.

3). Now you need to press and hold the button of the “SETUP” unless you will see the indicator of the light and then you have to release the button.

4). Press and Hold the button of the remote. You will see that the “Red Light” will blink and it remains on.

5). Please “Enter the Code” which you will get in the list of the code. By using the button of the remote, you have to enter the valid code.

6). Then press “Power” button. if your code is correct then your device will turn off, means you programmed your device successfully with remote.

Note: if you have entered the incorrect code then your device will not turn off it means your have try again with different code with same steps.

Make sure that if you will not press any button then after 10 seconds, the remote will exit all the setup. Again you have to start the process. In the last, you have to point the remote towards the device. You need to press the button of the POWER if your device turns off. In case, your device does not turn off then you have return towards step3 and enter the next code from the list.You have to do this process until you will find the code for your device.

Programming Samsung Universal Remote With Auto Code Search

You have to read the below steps just to start the search of the auto code. As through the auto search, you can easily search the codes as all the codes are stored in the remote. So let us follow the below steps-

1). You have to Turn on your device that you want to control.

2). Now press button of the “Setup” for the 4 seconds. then press the corresponding device button.

3). Now Press the “POWER” button then wait for the device to turn off.

4). After that press and release the button of the POWER just to start the search. You will see that the red indicator will flashes just for the 2 seconds when you search the code.

5). Make sure that your finger should be on the #1 button just to prepared to lock-in the code.

6). When you see that the device is shut off or start begins playing, then you need to press the #1 button. The indicator of the red light will turn off. its means you device successfully paired with remote.

Now you have to point the remote at your device. You need to examine that the device operates as per your desire. In case, it does, then there is no programming required. If you see the error then you have to go to the step2 again and start the auto search again. For every device (TV, DVD, SAT, AUX), you have a repeat this process in the system of your entertainment. At one time you can program the eight devices.

Final Words-

Well, this was all about the steps that you need to follow Samsung tv codes. You can reduce the headache by using the universal remote. As you can work with the single remote. You just need to follow the above steps then you can get the best result without facing any kind of problem.