You can control your Sceptre TV with a universal after that you will not need to use the separate remote for your Sceptre TV. However, it is not that much easy for that you need to follow a proper process and you also need 5 digit remote codes and 4 digit codes
- 1 Sceptre Tvs Universal Remote Codes List
- 2 Steps To Program The Sceptre Tvs Universal Remote
Sceptre Tvs Universal Remote Codes List
So, if you are searching for the sceptre tv codes, then here you can get everything. Not only the sceptre remote codes but even we will also share the process to follow by which you can easily program your own Sceptre TV Universal Remote Code.
Sceptre TV Universal 4 Digit Remote Codes
0991, 0000, 0080, 2337, 3899, 4886, 2528, 4139, 0149, 1132, 3521, 4071, 5111, 0878, 1217, 1360, 1599, 2506, 1392, 1467, 1365, 1167, 1318, 1814, 0516, 5260, 5367
Sceptre TV Universal 5 Digit Remote Codes For RC64
10878, 11217, 11360, 11599, 10000
Sceptre TV Universal 3 Digit Remote Codes
500, 677, 781, 640, 654, 159, 246, 207, 674, 908, 641, 837, 552, 064, 279, 086
Sceptre TV’s Universal GE Remote Codes
1167, 1132, 0149, 5260, 5367, 3521, 4071, 5111, 3521, 4071, 5111, 3521, 4071, 5111
Steps To Program The Sceptre Tvs Universal Remote
To use the sceptre remote codes you need to follow a few steps. Because it doesn’t what are you doing, you must follow the complete process. So, to program your own Sceptre TV Universal Remote you need to do some small things with your remote and you will be able to program the Sceptre TVs Universal Remote.
However, the process is not so tough, all you need to pick your remote and then point to the device for which you want to program your universal remote. Then simply follow the given steps below.
Programming Sceptre Tvs Universal Remote With Direct Code Entry
In case, you are searching for the easy steps just to enter the code at your device then you landed at the best post because below, here you will get the steps that you need to follow for the direct code entry. So let’s have a look-
1). First of all “Find the code” from above list
2). After that, you need to “ON” the device according to the wish that you want to control.
3). Now you need to press and hold the button of the “SETUP” unless you will see the indicator of the light and then you have to release the button.
4). Press and Hold the button of the remote. You will see that the “Red Light” will blink and it remains on.
5). Please “Enter the Code” which you will get in the list of the code. By using the button of the remote, you have to enter the valid code.
6). Then press “Power” button. if your code is correct then your device will turn off, means you programmed your device successfully with remote.
Note: if you have entered the incorrect code then your device will not turn off it means your have try again with different code with same steps.
Make sure that if you will not press any button then after 10 seconds, the remote will exit all the setup. Again you have to start the process. In the last, you have to point the remote towards the device. You need to press the button of the POWER if your device turns off. In case, your device does not turn off then you have return towards step3 and enter the next code from the list.You have to do this process until you will find the code for your device.
Programming Sceptre Tvs Universal Remote With Auto Code Search
You have to read the below steps just to start the search of the auto code. As through the auto search, you can easily search the codes as all the codes are stored in the remote. So let us follow the below steps-
1). You have to Turn on your device that you want to control.
2). Now press button of the “Setup” for the 4 seconds. then press the corresponding device button.
3). Now Press the “POWER” button then wait for the device to turn off.
4). After that press and release the button of the POWER just to start the search. You will see that the red indicator will flashes just for the 2 seconds when you search the code.
5). Make sure that your finger should be on the #1 button just to prepared to lock-in the code.
6). When you see that the device is shut off or start begins playing, then you need to press the #1 button. The indicator of the red light will turn off. its means you device successfully paired with remote.
Now you have to point the remote at your device. You need to examine that the device operates as per your desire. In case, it does, then there is no programming required. If you see the error then you have to go to the step2 again and start the auto search again. For every device (TV, DVD, SAT, AUX), you have a repeat this process in the system of your entertainment. At one time you can program the eight devices.
Well, when now you have done all the things then there is nothing left to do. Now it is time to say goodbye to the headache to manage different remote for each and every device. Because this digital era gave us the best gift, yes, of course, I am talking about the universal remote that you recently programed for your own TV. I hope this was not so tough and you found it well-written and working as well. Well, if you didn’t copy the given codes till now, then do it now and enjoy the headache-free experience.