Do you wish to control all your devices using one universal remote? Let the Supersonic remote control take all the job done. This type of universal remote is amongst the easiest to set up and use. It is designed to operate a maximum of six devices including your television and component. Once successfully programmed, you will completely enjoy its benefits!
- 1 Supersonic Universal Remote Codes List
- 2 How to Program Supersonic Universal Remote
Supersonic Universal Remote Codes List
We have included different supersonic universal remote codes in our list compatible to almost a hundred of brands. Search the best code for the model and brand of your device using our Supersonic universal remote codes list. The Supersonic universal remote codes have their own unique function which when entered on the compatible device will definitely work well. Find enjoyment with your favorite device with the help of our given Supersonic tv remote codes.
Supersonic Universal Remote 4 Digit Codes
1421, 0208, 5330, 0556, 0698, 3595, 0944, 0455, 4701, 0241, 0096
Supersonic Universal Remote 5 Digit Codes
11125, 13595, 12424, 17048, 12104, 15322, 13593, 21354, 13135, 13154, 13877, 22321, 13894, 13204, 14421, 11753, 11233
This Supersonic remote is designed with advanced features able to control up to six devices. If you hate the clutter of more than one remote control, take the Supersonic tv remote and enter the right code compatible with your device.
How to Program Supersonic Universal Remote
How do you program a Supersonic remote control? This is the question anyone might be asking when using the Supersonic tv remote. When you buy the project, normally comes along the Supersonic universal control manual which will serve as reference in searching for the codes needed. In behalf of the manual, we will be guiding you on how to program the supersonic tv remote along with the codes compatible to any device you wish to control. We make the instruction very simple so that you won’t need the help of an expert to program the Supersonic remote control. Find the below instructions on how to program the Supersonic universal remote:
Programming Supersonic Universal Remote With Direct Code Entry
In case, you are searching for the easy steps just to enter the code at your device then you landed at the best post because below, here you will get the steps that you need to follow for the direct code entry. So let’s have a look-
1). First of all “Find the code” from above list
2). After that, you need to “ON” the device according to the wish that you want to control.
3). Now you need to press and hold the button of the “SETUP” unless you will see the indicator of the light and then you have to release the button.
4). Press and Hold the button of the remote. You will see that the “Red Light” will blink and it remains on.
5). Please “Enter the Code” which you will get in the list of the code. By using the button of the remote, you have to enter the valid code.
6). Then press “Power” button. if your code is correct then your device will turn off, means you programmed your device successfully with remote.
Note: if you have entered the incorrect code then your device will not turn off it means your have try again with different code with same steps.
Make sure that if you will not press any button then after 10 seconds, the remote will exit all the setup. Again you have to start the process. In the last, you have to point the remote towards the device. You need to press the button of the POWER if your device turns off. In case, your device does not turn off then you have return towards step3 and enter the next code from the list.You have to do this process until you will find the code for your device.
Programming Supersonic Universal Remote With Auto Code Search
You have to read the below steps just to start the search of the auto code. As through the auto search, you can easily search the codes as all the codes are stored in the remote. So let us follow the below steps-
1). You have to Turn on your device that you want to control.
2). Now press button of the “Setup” for the 4 seconds. then press the corresponding device button.
3). Now Press the “POWER” button then wait for the device to turn off.
4). After that press and release the button of the POWER just to start the search. You will see that the red indicator will flashes just for the 2 seconds when you search the code.
5). Make sure that your finger should be on the #1 button just to prepared to lock-in the code.
6). When you see that the device is shut off or start begins playing, then you need to press the #1 button. The indicator of the red light will turn off. its means you device successfully paired with remote.
Now you have to point the remote at your device. You need to examine that the device operates as per your desire. In case, it does, then there is no programming required. If you see the error then you have to go to the step2 again and start the auto search again. For every device (TV, DVD, SAT, AUX), you have a repeat this process in the system of your entertainment. At one time you can program the eight devices.
The use of universal remote control nowadays is greatly valuable especially when controlling a number of devices and the Supersonic universal remote is not an exemption. If you have successfully saved the code compatible to your device, please let us hear your experience. We hope that this post have helped in setting up your Supersonic universal remote control.