You might be searching for the vivitar 8 in 1 universal remote manual, because it gives you the liberty to control all your devices with a single remote only called Vivitar. The only you will need to program a Vivitar universal remote is the vivitar universal remote codes. Well, your searching is over now, because here in this post, you can get the complete list of vivitar universal remote codes. By using them you can easily program your Vivitar Universal Remote to control 8 devices with a single remote.
Vivitar Universal Remote Codes List
0053, 5199, 3031
Vivitar Universal Remote Instructions
- First of all, you need to “Turn on your device”.
- After that press the “TV button” on your Vivitar Universal Remote
- Press the Setup button and hold it until it didn’t show Light Flash
- After following all the above instructions enter the vivitar universal remote code from above list
- Now press the power button and hold it until switch off.
- Once done, now you can release the power button.
Programming Vivitar Universal Remote With Direct Code Entry
In case, you are searching for the easy steps just to enter the code at your device then you landed at the best post because below, here you will get the steps that you need to follow for the direct code entry. So let’s have a look-
1). First of all “Find the code” from above list
2). After that, you need to “ON” the device according to the wish that you want to control.
3). Now you need to press and hold the button of the “SETUP” unless you will see the indicator of the light and then you have to release the button.
4). Press and Hold the button of the remote. You will see that the “Red Light” will blink and it remains on.
5). Please “Enter the Code” which you will get in the list of the code. By using the button of the remote, you have to enter the valid code.
6). Then press “Power” button. if your code is correct then your device will turn off, means you programmed your device successfully with remote.
Note: if you have entered the incorrect code then your device will not turn off it means your have try again with different code with same steps.
Make sure that if you will not press any button then after 10 seconds, the remote will exit all the setup. Again you have to start the process. In the last, you have to point the remote towards the device. You need to press the button of the POWER if your device turns off. In case, your device does not turn off then you have return towards step3 and enter the next code from the list.You have to do this process until you will find the code for your device.
Programming Vivitar Universal Remote With Auto Code Search
You have to read the below steps just to start the search of the auto code. As through the auto search, you can easily search the codes as all the codes are stored in the remote. So let us follow the below steps-
1). You have to Turn on your device that you want to control.
2). Now press button of the “Setup” for the 4 seconds. then press the corresponding device button.
3). Now Press the “POWER” button then wait for the device to turn off.
4). After that press and release the button of the POWER just to start the search. You will see that the red indicator will flashes just for the 2 seconds when you search the code.
5). Make sure that your finger should be on the #1 button just to prepared to lock-in the code.
6). When you see that the device is shut off or start begins playing, then you need to press the #1 button. The indicator of the red light will turn off. its means you device successfully paired with remote.
Now you have to point the remote at your device. You need to examine that the device operates as per your desire. In case, it does, then there is no programming required. If you see the error then you have to go to the step2 again and start the auto search again. For every device (TV, DVD, SAT, AUX), you have a repeat this process in the system of your entertainment. At one time you can program the eight devices.
I hope you find this post helpful. Now you have the information and the working vivitar universal remote codes by which you can easily program your own vivitar universal remote. Once you have done, you will be able to control all your devices with the one remote.