There are a number of different universal remote controls flooding in the market nowadays and Zenith universal remote is not an exemption. This is due to the advanced features that universal remote is designed with. With using the right and unique code, you will enjoy the wonders of Zenith universal remote.
Zenith Universal Remote Codes List
If you are finding ways to control several devices with convenience, refer to our list of Zenith universal remote codes given below. There are outstanding benefits when you decide to use a single remote to work with your devices. The Zenith universal remote setup takes only a few step by step procedures and with the given codes, you are sure to complete the process successfully.
Zenith Universal Remote 3 Digit Codes
008, 117, 311, 405, 407, 512, 601, 701, 713, 916, 101, 142, 149, 201, 224, 225, 229, 237, 153, 154, 172, 401, 460, 461, 498, 501, 502, 521
We also provide in our list the Zenith universal remote codes for Vizio tv. If you are searching for this type of setup, below you will also find Zenith universal remote codes which will really guide you in setting up your device.
How to Program Zenith Universal Remote
There are easy ways on how to program a Zenith universal remote and this article will show you how. Programming may sound complicated but no need to worry because the Zenith universal remote setup is simply an easy procedure. For beginners, the Zenith universal remote is designed with easy to operate keys where programming is made conveniently possible. There are different ways on how to setup this universal remote and you only have to select one that is comfortable for you. Make sure that you have already searched for the right code compatible to the type of device you wanted the remote to work with.
Here are the ways on how to program a Zenith Universal remote:
Programming Zenith Universal Remote With Direct Code Entry
In case, you are searching for the easy steps just to enter the code at your device then you landed at the best post because below, here you will get the steps that you need to follow for the direct code entry. So let’s have a look-
1). First of all “Find the code” from above list
2). After that, you need to “ON” the device according to the wish that you want to control.
3). Now you need to press and hold the button of the “SETUP” unless you will see the indicator of the light and then you have to release the button.
4). Press and Hold the button of the remote. You will see that the “Red Light” will blink and it remains on.
5). Please “Enter the Code” which you will get in the list of the code. By using the button of the remote, you have to enter the valid code.
6). Then press “Power” button. if your code is correct then your device will turn off, means you programmed your device successfully with remote.
Note: if you have entered the incorrect code then your device will not turn off it means your have try again with different code with same steps.
Make sure that if you will not press any button then after 10 seconds, the remote will exit all the setup. Again you have to start the process. In the last, you have to point the remote towards the device. You need to press the button of the POWER if your device turns off. In case, your device does not turn off then you have return towards step3 and enter the next code from the list.You have to do this process until you will find the code for your device.
Programming Zenith Universal Remote With Auto Code Search
You have to read the below steps just to start the search of the auto code. As through the auto search, you can easily search the codes as all the codes are stored in the remote. So let us follow the below steps-
1). You have to Turn on your device that you want to control.
2). Now press button of the “Setup” for the 4 seconds. then press the corresponding device button.
3). Now Press the “POWER” button then wait for the device to turn off.
4). After that press and release the button of the POWER just to start the search. You will see that the red indicator will flashes just for the 2 seconds when you search the code.
5). Make sure that your finger should be on the #1 button just to prepared to lock-in the code.
6). When you see that the device is shut off or start begins playing, then you need to press the #1 button. The indicator of the red light will turn off. its means you device successfully paired with remote.
Now you have to point the remote at your device. You need to examine that the device operates as per your desire. In case, it does, then there is no programming required. If you see the error then you have to go to the step2 again and start the auto search again. For every device (TV, DVD, SAT, AUX), you have a repeat this process in the system of your entertainment. At one time you can program the eight devices.
How did you find the step by step instructions in programming your Zenith universal remote? Has the given code matched with your device? Please let us know what code have you used to operate with which device. Share your experience with us by leaving your message on the comment box provided below.